Brett Nachman
Member
- Joined
- Feb 15, 2005
- Messages
- 7
- Reaction score
- 0
So, I have a Lone Star Special 1x12 which I love, but there is one thing that is going on, and I can't figure out the reason.
Basically, whenever I switch into or out of 5w mode, there is a loud pop. This happens whether it is in the same channel (i.e., I flick the switch on the front of the amp) or from one channel to the other (e.g., using the footswitch to switch from 5W channel 2 to 30W channel 1).
When I switch from 15 to 30 or vice versa---in any combination---no pop at all.
Mesa suggested it might be a power tube problem, but switching ot the tubes had no effect. Any ideas.
Thanks,
Brett
Basically, whenever I switch into or out of 5w mode, there is a loud pop. This happens whether it is in the same channel (i.e., I flick the switch on the front of the amp) or from one channel to the other (e.g., using the footswitch to switch from 5W channel 2 to 30W channel 1).
When I switch from 15 to 30 or vice versa---in any combination---no pop at all.
Mesa suggested it might be a power tube problem, but switching ot the tubes had no effect. Any ideas.
Thanks,
Brett