FastRedPonyCar
Well-known member
I've still got quite a bit of tweaking to do with this amp and I haven't even tried to do anything with the EQ but here are a couple of clips I did yesterday.
I plugged the recording output into the FX loop return of my 100 watt (set to 50 watts) carvin valvemaster amp. It's got a 5 year old quartet of =C= 6L6GC's in it so that probably doesn't help much.
that's sent to a 2X12 cab with earcandy clone speakers and one of them is mic'd with an SM57 into a studio projects VTB1 preamp into my M-audio fast track pro usb box.
Recorded with adobe audition 2.0. I didn't do any post recording eq'ing or anything. The andy timmons backing track recording had the two tracks run through the waves SSL compressor to balance stuff out. The chugging clip didn't have anything done to it. I did have a little delay coming from my gmajor but not a lot.
Mistakes aplenty on the timmons track as it was all one take.
http://www.drewlankford.com/Music/Timmons_Track.mp3
http://www.drewlankford.com/Music/Mesa_chug_test.mp3
I don't have my eq settings here at work but if any of you are interested, I can post them when I get home.
I plugged the recording output into the FX loop return of my 100 watt (set to 50 watts) carvin valvemaster amp. It's got a 5 year old quartet of =C= 6L6GC's in it so that probably doesn't help much.
that's sent to a 2X12 cab with earcandy clone speakers and one of them is mic'd with an SM57 into a studio projects VTB1 preamp into my M-audio fast track pro usb box.
Recorded with adobe audition 2.0. I didn't do any post recording eq'ing or anything. The andy timmons backing track recording had the two tracks run through the waves SSL compressor to balance stuff out. The chugging clip didn't have anything done to it. I did have a little delay coming from my gmajor but not a lot.
Mistakes aplenty on the timmons track as it was all one take.
http://www.drewlankford.com/Music/Timmons_Track.mp3
http://www.drewlankford.com/Music/Mesa_chug_test.mp3
I don't have my eq settings here at work but if any of you are interested, I can post them when I get home.