How to assign fx loop on channels 2&3, not to the channel 1?

[Hellknight]

Hi everyone,
I have put a noise gate and a parametric eq in the fx loop of my mark V, I dont want this to affect my channel 1 soud. My question is: How to assign fx loop on channels 2&3, not to the channel 1?
Thank u if you have a trick or the answer
Ciao tutti, ho meso un noise gate e un eq parametrico nella fx loop del mio Mark 5, non volgio che abbia un effetto sul canale 1. Come fare per mandare l'effetto solo sui canali 2 e 3? Grazie per la rsiposta
Bononjour à tous, j'ai un noise gate et un eq parametrique dans ma boucle d'effet (Mark 5) et j'aimerai activer la boucle d'effet seulement sur les canaux 2 et 3 et pas sur le canal 1, si vous avec une astuce ou la réponse merci beaucoup.

 

[philosopher]

Assuming V90, I don't think this is possible. You can either hard assign it to one channel (back panel) or set to FT SW, in which case you'll have to switch it on/off with the footswitch

 

[Eevil]

Hi everyone,
I have put a noise gate and a parametric eq in the fx loop of my mark V, I dont want this to affect my channel 1 soud. My question is: How to assign fx loop on channels 2&3, not to the channel 1?
Thank u if you have a trick or the answer
Ciao tutti, ho meso un noise gate e un eq parametrico nella fx loop del mio Mark 5, non volgio che abbia un effetto sul canale 1. Come fare per mandare l'effetto solo sui canali 2 e 3? Grazie per la rsiposta
Bononjour à tous, j'ai un noise gate et un eq parametrique dans ma boucle d'effet (Mark 5) et j'aimerai activer la boucle d'effet seulement sur les canaux 2 et 3 et pas sur le canal 1, si vous avec une astuce ou la réponse merci beaucoup.

Possible only with external switching system.. I bought EM custom switching dongle for my Mark V and it has been pretty easy to use - no external power needed and programmable via phone app.

No idea about the french part

 

[Hellknight]

Possible only with external switching system.. I bought EM custom switching dongle for my Mark V and it has been pretty easy to use - no external power needed and programmable via phone app.

No idea about the french part

I have found a em custom midi switcher but I have no idea how it works. I mean, I'd like to assign eq and reverb to all channels and fx loop just to channel 2&3. If I program this process on the mark 5 with the em custom midi switcher, unplug it in order to plug the Mark footswitch (I need it to change channels) and using the footswitch, does it work ? (maybe I can plug the footswitch in the em custom midi switcher, in this case I don't need to unplug the midi switcher ?) After I have turned off the Mark 5, will it keep the settings? Sorry for my English, I just hope you understand what I'm saying.

 

[Eevil]

I have found a em custom midi switcher but I have no idea how it works. I mean, I'd like to assign eq and reverb to all channels and fx loop just to channel 2&3. If I program this process on the mark 5 with the em custom midi switcher, unplug it in order to plug the Mark footswitch (I need it to change channels) and using the footswitch, does it work ? (maybe I can plug the footswitch in the em custom midi switcher, in this case I don't need to unplug the midi switcher ?) After I have turned off the Mark 5, will it keep the settings? Sorry for my English, I just hope you understand what I'm saying.

The EM custom can control the amp channels also. So you would need some midi controller for the em custom to work properly.

With that you could program:
Program1: eq+rev enabled and ch1
Program2: eq+rev+fx and ch2
Program3: eq+rev+fx and ch3

as an example.