Search results

The TC Nova System does not allow to use 4 cable method. Which is a shame really.

Lets say its ajusted perfecty on clean FAT Ch 1 and you change to tweed you have to crank up the reverb (at the back) to compensate the loss of reverb. Even cranked to max in tweed you don't get that much of it out. With a pedal in the loop its more predictable and uniform.

I tried many times but I decided that or I don't like spring reverb or this one is a bit strange. It's almost like a tremolo/reverb I can hear some modulation if that is the normal spring behavior then I prefer digital verb :shock:

I installed inexpensive Chinese Shuguang EL34-B (supposedly Ruby Tubes!?) as a test two weeks ago and I'm keeping them in. No fizz just fine. Just rounder. I have little sonic memory when it comes time to compare subtle texture changes in sound but what I can say is I didn't have any irritating...

I use now and then the Fisman piezo of my Parker without any problems through CH 1.

I understand that a 1x12" Thiele (or widebody Thiele) would add bottom specially when high gain is dialed in. I am looking at replacing a 2x12" THD cab (3/4) with CL-80 by one of these 1x12 Mesa widebody Thiele 1x12 Mesa 3/4 2x12 Mesa 3/4 I like the sound I'm getting now but the speakers...

Just got it checked and indeed when the MkV FX loop is inactive the signal that is sent back to the bOSS return jack will simply get to thepower stage and never get back to the multieffects. I would suggest to make sure you can follow the signal throught the FX chain within the GT-8 and that the...

Well! Your connections are definitely alright. By flying over the GT-8 manual and it seems like the GT-10 where the external loop can be placed about anywhere in the FX-chain just double check its where it should be, next the external loop mode should be NORMAL so the signal returns after being...

That is exactly how I use my GT-10. The only thing I could imagine is the FX is not active on the MkV. The whole setup is pretty quiet. The distortion introduces too much noise (IMO). I don't use the models. I also use the AMP switching feature. So I can go from one channel to the next using one...

I'll have popcorn.

Are you yelling really?

Whoopteedoo! Got up on the wrong side this morning?

They sold a lot of these Mark series combos in the last 30 years so I guess there are very good chances that it does what its supposed to do. I must of have a streak of bad luck with mine. Murphy's law type of things. And at about 68 lbs (for the standard combos not the hadrwood ones) they are...

Jump in volume is normal I think. As for the reverb it all but go away in Tweed I don't know why but it was mentionned by others as well. In Tweed I have to cut on the presence and treble to make it rounder. Its a great mode I like it a lot. I ended it up using it in place of fat because I set...

Go for the head! Been there, just read my story here http://forum.grailtone.com/viewtopic.php?f=33&t=36267

2350$ in Montreal for a head. They charge more for the combo. The difference depends on the cdn/us exchange rate. Expect a 150$ dif.

There is nothing in the Holiday issue on the stands now. Do you mean november? january?

If you slave the mute output (tuner output at the back activated when you pull the solo know or engage the mute footswitch) )to an other amp or PA or mixer and they all seems to sound about right, balanced, etc. than you saved yourself a lot of swapping since it would point likely to the power...

Just a quick comment. If you want an exact (or very close) replicate of the original head dimensions you need to know that the reverb tank is actually installed in a big hole on the bottom piece of wood and you can see it between the rubber feet. There must be a space limitation reason for...

From the schematics the reverb comes to play just before the respective channel masters which feeds the GEQ which then go to the FX loop.