switching voicing on Mesa Simul-Class 2:90

[dschaaf]

Hi,

I am not using a TriAxis with my 2:90. When the manual says that you can use a "standard tip to ground switch" to change the voicing does that mean a standard channel switch box that you would use to change channels on your amp?

....sorry for the stupid question, just want to make sure before I try it

Thanks,
Derek

 

[Jackie]

Yep, if by "standard channel switch box" you mean something like this it should work IMO.

I have one of these that works with the 2:90 but the problem is that it's a momentary switch so it's always on and it turns off the voicing only when you fully depress it.

 

[dschaaf]

Thanks for your help!

Ok, I used a channel switch box from one of my other amps and it seems to work fine to change (engage) the voicing. Does the switch box have to stay connected once engaged...it seems if I disconnect in from the input (for deep for example) it toggles that voicing back off.

Thanks,
Derek

 

[bluestometal]

The voicing's off by default so, when you disconnect the switch, it comes back to the default setting... off.

 

[dschaaf]

Gotcha...thanks!

d.