bloodbath666
Active member
- Joined
- Aug 15, 2006
- Messages
- 29
- Reaction score
- 0
I received a mark III today and all I can seem to get out of it is a clean sound. The amp has the r2 volume mod done by boogie already, and came with 2 non-boogie footswitches. The two button footswitch can control the EQ being in and out and I guess the other button was for reverb which was taken out of the amp for the mod. I have a one button switch that came with it as well, but I can't seem to get into high gain mode.
Is there a way to get to channel 3 without any footswitches? I've been pulling and pushing knobs and plugging in footswitches for an hour now and I'm pretty confused.
BTW- I read the boogie mark III manual and have tried to plug the switches in, with there configuration and still no luck.
Is there a way to get to channel 3 without any footswitches? I've been pulling and pushing knobs and plugging in footswitches for an hour now and I'm pretty confused.
BTW- I read the boogie mark III manual and have tried to plug the switches in, with there configuration and still no luck.