BlueFlames
New member
- Joined
- Jun 23, 2008
- Messages
- 3
- Reaction score
- 0
Hello,
I just got the F-series amplifier and found strange thing from the manual:
"In the STANDBY position (switch up), the
tubes are at idle so that during power up they may warm up before being put to use."
PROBLEM:
Is the standby switch really on a STANDBY mode when the switch points up. This is quite strange because the manual goes on like this:
"Before the power is switched on, make sure the STANDBY switch is in the
STANDBY position. Wait at least 30 seconds and then flip the STANDBY
switch to its ON position."
Question to you all:
How do I use the STANDBY switch when I power on? The normal way - STANDBY switch down or follow the amp manual way - STANDBY switch up. The same text can be found also at the Express -series manual. Does it have a same switch up or down issue? Can you explain to me a correct way to power up these amps? Thanks !!
Jake
I just got the F-series amplifier and found strange thing from the manual:
"In the STANDBY position (switch up), the
tubes are at idle so that during power up they may warm up before being put to use."
PROBLEM:
Is the standby switch really on a STANDBY mode when the switch points up. This is quite strange because the manual goes on like this:
"Before the power is switched on, make sure the STANDBY switch is in the
STANDBY position. Wait at least 30 seconds and then flip the STANDBY
switch to its ON position."
Question to you all:
How do I use the STANDBY switch when I power on? The normal way - STANDBY switch down or follow the amp manual way - STANDBY switch up. The same text can be found also at the Express -series manual. Does it have a same switch up or down issue? Can you explain to me a correct way to power up these amps? Thanks !!
Jake