Search results

I beleave that no switch cables can melt down in that way...unless they're the same as Christmas lights series cables :twisted: and the most important thing.... can a 2:90 melt switching cables still running powered on? No fuse/tube blow.... no ac plug melted in the wall.. with all respect...

Definitely, for connect a power amplifier to a cabinet you must have a speaker cable. (the cab must have the same ohms value for the power amplifier. Cab must always have the same or higher ohms.. NOT MINOR) Shielded cable (made for an instrument signals) must be used for connect all your rig...

:wink: i know. peace. :P

Not only in ld 2 yellow. All 8 modes could be clear or not. A rhy green or yellow with the gain crancked up became slightly distorted. Best for bluesy tone IMO. All the leads are sensitive to gain and ld drive parameters....so, you can use a lead mode with low gain/drive and with an expr pedal...

Any idea or suggestion about Eq? I would to put one in the tri fx loop for some distortion sound reshaping. What do you think about dbx or bbe? Can i use a stompbox eq for that or a single rack unit is the best choice?

Hi ytse_jam, wikipedia.org not says all things right. Wikipedia is a online resource and all the pages are a "summa" of information from peoples all around the world. Maybe what you had read is an article wrote by a common user. The cool thing is "make your search and if what you've found don't...

Hi, if the display flicker every time you switch on the tri and the sound signal remains fluid and don't follow the flicks, maybe a bad soldering connection. If the flicks affect the sound, you can find he trouble in the power input stage. I'd a similar problem last mounth with the 8 mode...

It sounds like a bad g-major preset routing. Try using the same routing and the same effects in your song presets. At least in each one. 8) The Compressor block generate this volume change. Tweak it a little for a perfect combination. :wink: :wink: Anto

Hi tramp, The best way to run your cabinet is matching the proper load ohm between the power amplifier and the cab. Sometimes you need to connect an amplifier to a non matched ohm cab. In this case, the cab ohm must be bigger than the power amplifier outputs. yes, you can connect 20/20 stere...

Thanks all for the tips. I've send my rig to a specialized mesa tech for a triaxis mode led repairing and also for a 3 or 4 blowing fuse in the last 2 mounths in the 2:90. Nothing so terrible or complicated. He told me that my rig is in perfect conditions and nothing works wrong. Fuse had blows...

thanks for the answer but I tried one answer on the argument and not a free answer on like making searches on Internet. The forum exists in order to allow many persons to be confronted, otherwise will be all to read manuals. :wink: :wink: anyway, thank you for reading my post. Peace Anto

mine from 1 to 10 increase gradually. Replace the pot by yourself or buy it and go to a tv/audio tech for the installation. They make a professional soldering, clean and in a few minutes :wink: anto

Hi Mandarine, in my triaxis the output knobs start at 1. From 0 to 1 nothing, from 1 to 10 it goes linear from normal to very loud. I've also the 2:90 and in between a g-major. Anto

I'm new in tubes world, so, i need an information. I use a 2:90 combined with a triaxis, both still new with the stock tubes. Last week i'd send both racks to mesa tech and since they're coming back, i've noticed a loss of gain.... in other words, with my old distortion settings, i can get now a...

HI, i've the same problem with lead 2. All the 3 mode Lead 2 are darker and with lacking gain. Changin' the tubes can solve something? The tri was send to me last week from a specialized tech and i don't remember it so flubby and so vintage oriented tone in lead 2 (specially in lead 2 red)...

Hi, G-force is very simple to program and easy to use, with a clear big display, with solid construction material. With g-force you can explore new sound (more shi-fi sound) and recreating some cool delay effects like Balleria 12/24 but it isn't a real harmonizer. The wah is a post effect...

Thank you, i'll try all those tips as soon as possible 8) ciao Antonio

Hi Greg, Now i haven't the Tri under my eyes (i'll post my settings tonight).... here my spec: cab: Mesa recto 4x12 with 4 vintage30 280w (mod. slanted oversized) The Tri and the 2:90 are new (last november) presence: usually i set to 12 o'clock or 13 sometimes volume: for both channel a...

Hi guys, this is my first post here. I've recently wired my rg 7620 with a d-sonic 7 in bridge position with the bar toward the neck. After some tweakins with my triaxis i can't reach a good tone. The new pickup sound too bass and in a band situations, with a constant palm mute on the 7th or on...