Search results

Just checking to see if anyone has swapped the Celestion C90 in their Mk IV Wide body for an EVM 12L, Eminence Delta Pro or indeed any other. They both look to have bigger cages than the C90, Is there enough room ? With the extra weight, Is it enough to just use the 4 holes from the C90 fitting...

Well, not too long ago there were a few around but can't find any at all now ! There is one in Germany atm, but the seller won't ship to anywhere that doesn't use the euro. However, I can pay in shekel's, if need be ! So, if anyone has one that's under the bed, gathering dust or just generally...

I use a Budda Wah, the build quality is superb, pedal travel good, quiet and true bypass. Original Boss CE 1 chorus ensemble and Tube screamer TS9. For Multi FX - a Sony DPS V77 in the FX loop. This is a studio module more than a dedicated guitar processor, but it's a great unit and there are...

If you "add to cart" you'll see it's $34.60 with the discount. Lyn

Why would you be wanting to change from 230 to 240v ? The UK's voltage used to be 240v but changed to 230 volts nominal: normally a single-phase supply, with a permitted range of voltage variation from plus 10% to minus 6%. just curious

Yes, the pre-amp tubes are interchangeable.

Should be straightforward enough. Make sure to remove the phono leads from the chassis sockets. Lyn

There have been a few in Europe fetching around the 400 Euro mark ! :(

Seconded ! Good feedback guys, this could really turn out to be a SNIT Lyn

Further on, say, what's the possibility of a Widebody Thiele, in the trad Mesa style (jute/vinyl), which they have neglected to provide for the Widebody combo owners ? Any idea of shipping prices to the UK/Europe ? Lyn

Also here for the grille cloth/vinyl covering and more http://www.vibroworld.com/parts/tech10.html Great idea for a Widebody Thiele !

Well Matt, the only other thing that was suggested by a tech, here in the UK was, it could be capacitor related. My IV B is a '95 model. But, with your amp only being 5 years old, I wouldn't have thought so. Lyn

Have you swapped the valves positions ? Try swapping v3 and v4 (to and from the reverb) with say v2 and v5, to rule out any valve problem. I had big problems with reverb hum on my Mk IV, tried all you've done and more. Finally nailed it down to the fan of all things ! When I unplugged it, the...

Here's an older style cab with the Mesa Boogie logo http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=290156596716&ssPageName=STRK:MEWA:IT&ih=019 When did the cab's (Thiele, Compact, Widebody) change to the Mesa Engineering logo ? If it's with the introduction of the Recto cab, as Aart...

What year was that ? I'm looking at the Mk series cabs and trying to figure out how old some of them are.

Looking at guitar cabs in particular when did the "Mesa Boogie" logo change to "Mesa Engineering" ? thanks Lyn

Back on again ..... btw, how on earth can shipping to Estonia be £33 ???? More than likely he doesn't know where it is ! Steer clear of this one. http://cgi.ebay.co.uk/Mesa-Boogie-MkIV-amp_W0QQitemZ120155627434QQihZ002QQcategoryZ4713QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Don't forget the amount of signal available, from the Recording Out, is determined by the Masters AND the Output Level. For example, you might not be driving the Output, or Masters, hard enough because it's (acoustically in the room) too loud. In that case, you could try using Tweed Power or...

Well, just after posting about the fan noise for recording, I disconnect the fan and not only wallow in the silence, but also revel in pure reverb, without the hummmmmmmmmmmmm !! Can anyone explain a link between the fan and the reverb ? Anyway, if anyone has a similar reverb issue, be sure to...

Anyone else bothered with the fan noise for close miked recording ? Do any users go for the silent recording DI ? My thoughts would be to unplug it. Shouldn't be a problem for a few hours, should it ? Does the fan get noisier with time, bearings wear out etc ? Worth replacing or not ? Lyn