So today i tried a delay pedal (MXR CarbonCopy) through the FX loop of my Studio Pre, and noticed that the repeats, even with the mix knob dimed, is barely audible, and it sounds "muffled" and "distorted", when you hear the repeats.
I tried to switch between "low" and "line" on the switch in the back but it only got lower on the line setting.
To see if the pedal was faulty i ran it in the front, and voila, it worked fine.
Now, i don't know what the solution would be for this, so can you help?
I tried to switch between "low" and "line" on the switch in the back but it only got lower on the line setting.
To see if the pedal was faulty i ran it in the front, and voila, it worked fine.
Now, i don't know what the solution would be for this, so can you help?