So my rig is almost complete...PICTURES :D

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Malin

Well-known member
Joined
Feb 12, 2010
Messages
116
Reaction score
0
I've been working really to put this rig together and I can say I'm almost done put I still to need to buy a few differents part like the RJM Y Not to be able to run both head together. I can say tthat running the Mesa Boogie Dual Rectifier and Peavey 6505+ together really gives a in your face. I'm able to boost both of them with the furman PQ3 and the sound is just insane. The triaxis will serve for my clean and a couple of lead patches. Also, I'll be sending my ISP Decimator for the Stereo mod. I did some esthetic mod that suits my own taste.

Here is what we have:
Furman PL Plus Serie II
furman PQ3 Parametric EQ
Voodoo Lab GCX
Voodoo Lab Ground Control Pro
ISP Decimator ProRackG
TC G Major
TC 1128 EQ
Mesa Boogie Dual Rectifier
Mesa Boogie Triaxis
Peavey 6505+







Now for the guitars....they all have been sent to my luthier and they are not stock one bit! All the electronic have been redone with new cts pots and and superswitch with some awesome PU's configurations. He added some resistors but I have no clue what he did...I just know they all sound awesome! All the guitar had extensive fretwork done (pleked) and have my custom set up that we came up with. The action is so low that we had to install PU rings in one guitar since we could not lower the PU's anymore. I will also had that he took the time to match the radius of the neck with each tremolo and its a pain in the *** since its all custom with shims.

First off, My Ibanez JPM P3 set with standart strings half step. The only major mods are the electronic and the brass block.





Second, we have my ESP Mirage Custom. This one we redone from A to Z. All the electronic are brand new. I'm running some BK coldsweat and nailbomb. We rerouted the whole cavity for the new gotoh trem. I also bought brand new gold tuners. She is now a black beauty with gold hardware.







My Ibanez J custom had some nice mods done. First off, we changed the stock PU's for a crunch lab and a liquifire. Since the action was so low, we decided to install pickup rings to be able to lower even more the action without having problems with the PU's and the strings. He also made a big brass block and redid the whole electronic.







At last but not least, my rare Ibanez American Master MA3! She's euiped with a Dimarzio Breed and Airzone, big brass block, new electronic...lo pro trem......bla bla bla too much to say!







And for **** and giggles...my kitty :)

 
The kitty takes the cake!!!

Where you gonna use that monster rig? Wow! I liked the Ibanez J Custom.
 
Looks great, lots of great sounds from that rig.

The cat looks very cute :wink: , PS, when it gets bigger it will try and scratch your speaker covers, when it dos have the amp cranked and waith till it gets close , then unleach the boogie fury, it will never get nere the speaker again , beleive me i have tried it :D
 
I'm very sorry, but it's against forum regulations to post pictures of your pussy.
 
every time i see a kitty like that i wanna give it a shot to stop it from growing.




is that wrong?
 
very cool rig!
a 6505+ is a killer amp too. love that direct attack you get from this amp. can imagine how awesome the overall sound must be by combining both amps.
 
Back
Top