Rocktron All Access + Axess GRX4 CC programming HELP!

[nexus]

Hi,
I got axess electronics GRX4 and need some help to control it with Rocktron.
I can´t get cc commands out from rocktron to GRX4.

Program change mode worked, but i have to use Control change mode to have instant access switches.

If anyone knows something about this, please help...

Thanks

 

[joe web]

setup the AA to 10 presets and 5 IA or to 5 presets and 10 IA, now you can sent CC# with the IA-switches.
factory setup is: the IA switches send the CC# equal to the switch number on the AA - let´s say switch 15 sends out CC-15 (which would be taptempo on rocktron effectunits), but you can easy edit the numbers.

 

[nexus]

thanks for your reply!

Now it works like it should, control values was wrong... set to off=off on=on, reading that tiny paper that came with grx4 closely, you see it should be 0=off 127=on