Preamp tube roll - Roadster

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chester

Well-known member
Joined
Mar 22, 2010
Messages
364
Reaction score
0
Location
Scotland
Anyone have experience with Groove Tubes 12AX7 Mullards? What do they do to feel and response compared to stock Mesas? More importantly, do they perform well in the Roadster cathode follower slots (V3 and V5 I think)?
 
I've never tried them, but they are made by New Sensor Corp, same as EH, Sovtek & Tung Sol, which have been known to fail in cathode follower positions (yes, V3 & V5).

If I was you, I would just try one or two in V1 &/or V2 where most if your tone structure is happening. V3 & V5 are designed as drivers/buffers for the tone stack & FX Loop.

Dom
 
domct203 said:
I've never tried them, but they are made by New Sensor Corp, same as EH, Sovtek & Tung Sol, which have been known to fail in cathode follower positions (yes, V3 & V5).

If I was you, I would just try one or two in V1 &/or V2 where most if your tone structure is happening. V3 & V5 are designed as drivers/buffers for the tone stack & FX Loop.

Dom

Thank you Sir - wasn't aware they were New Sensor children ..
 

Latest posts

Back
Top