Considering a Mesa Mark II A - Need Advice from the experts

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JacobW

New member
Joined
Oct 27, 2024
Messages
3
Reaction score
3
Hello everyone! :)
I have an opportunity to buy a '79/'80 Mesa Boogie Mark II A (head, no graphic EQ) in good condition at a decent price. I've always wanted a Mark I with graphic EQ, but they are extremely rare and expensive here in Europe. So I think the Mk II A is the next best thing.

Unfortunately, I can't play the amp in person, but the seller seems legit and we had a good conversation on the phone about the amp. I'm new to Mesa Boogie amps, and I've had trouble finding information specifically about the Mk II A (famous players, tone characteristics, etc.).

Could you guys tell me how it differs from other amps in the Mark series?

One more thing - what drew me to Mesa Boogie amps is this Eagles live concert video from 1977. Don Felder apparently plays through a Mark I combo, and the tone he gets is just phenomenal. Is it possible to achieve a similar tone with the Mk II A? I'm particularly interested in that distinctive rasp around the notes.

Below I have attached some photos of the amp and a short video that the seller sent me.
Thanks!


 

Attachments

  • MESA Son of Boogie 100_60w wzmacniacz - 2.jpg
    MESA Son of Boogie 100_60w wzmacniacz - 2.jpg
    227.9 KB
  • MESA Son of Boogie 100_60w wzmacniacz - 3.jpg
    MESA Son of Boogie 100_60w wzmacniacz - 3.jpg
    182.1 KB
  • MESA Son of Boogie 100_60w wzmacniacz - 4.jpg
    MESA Son of Boogie 100_60w wzmacniacz - 4.jpg
    222.3 KB
  • Video.MOV
    9.4 MB
  • MESA Son of Boogie 100_60w wzmacniacz - 1.jpg
    MESA Son of Boogie 100_60w wzmacniacz - 1.jpg
    203.6 KB
Thank you guys! I know he used Tweed Deluxe in the studio, but live he used quite a few different amps. In the video I linked you can see a Mesa Boogie behind him (supposedly a Mark I), and I think it sounds great
 

Attachments

  • EaglesA869.JPG
    EaglesA869.JPG
    742.1 KB
  • the-eagles-fine-art-print-1977.jpg
    the-eagles-fine-art-print-1977.jpg
    89.4 KB
Thank you guys for the input! I decided to pull the trigger on the amp. I haven't turned it on yet, just cleaned it up a bit and took a look inside.

It's dated June 7th, 1979, and there's "XPH" written on the side of the chassis. From what I was able to find on the Internet, the "X" means Export and "H" probably means hundred (watts) - no idea about the "P" though.

What seems weird to me is that there are 3 pre-amp tubes instead of 4 (from what I've seen on the Internet, there are usually 4, but maybe that's because there's no reverb, not sure though).
Also, there's a switch that selects between 12AX7 and TR1009, which was set to TR1009 even though there's a tube installed. Should it be like that? I'm not sure if it's okay to have a tube there with the switch set to TR1009.

One more thing - there's a capacitor glued to the power transformer, with one leg soldered to the chassis. Other than that, the amp seems pretty much original, though the filter caps were changed.

What do you guys think? Maybe something weird catches your eye in these photos?
I'll try to record a few tones next week and share them here with you.

(I can attach only 10 photos, I posted more on imgur )
 

Attachments

  • 20241030_120450.jpg
    20241030_120450.jpg
    359.7 KB
  • 20241030_120445.jpg
    20241030_120445.jpg
    394 KB
  • 20241030_120125.jpg
    20241030_120125.jpg
    233.8 KB
  • 20241030_120116.jpg
    20241030_120116.jpg
    74.6 KB
  • 20241030_120104.jpg
    20241030_120104.jpg
    314.4 KB
  • 20241030_115749.jpg
    20241030_115749.jpg
    421.2 KB
  • 20241030_115745.jpg
    20241030_115745.jpg
    413.8 KB
  • 20241030_115737.jpg
    20241030_115737.jpg
    166.5 KB
  • 20241030_115732.jpg
    20241030_115732.jpg
    185.2 KB
  • 20241030_115552.jpg
    20241030_115552.jpg
    286 KB
Last edited:

Latest posts

Back
Top