BoOgIeTiMe
Member
- Joined
- Jun 29, 2009
- Messages
- 7
- Reaction score
- 0
Okay, correct me at any moment if I'm worng, but It's my understandting that the Triple Rec is always on channel 2 when you turn on the amp right? and in turn the footswitch should display ch. 2 lit up, correct? Well, my amp is always on channel 2 when I turn it on but my footswitch shows the FX loop as being activated, is this normal? If amp is on Channel two shound't the footswitch represent the same? Also, if the footswitch or cable is bad could this be the cause of a loss in volume in all channels, particularly ch. 3?
Please Help.
I forgot to mention that I made sure all cables were connected right and in the rear of amp I had the assign and and channel selector knobs set on footswitch.
Please Help.
I forgot to mention that I made sure all cables were connected right and in the rear of amp I had the assign and and channel selector knobs set on footswitch.