joey_truelove
Well-known member
- Joined
- Aug 1, 2006
- Messages
- 98
- Reaction score
- 0
I'm about to re-cap my 50/50, a bias pot fitted and possibly even looking into having the OTs replaced.
However I just don't get the wiring of the OT secondaries. The 8 ohm outs appear to have twin leads, orange and yellow. If I got it right the OTs were designed for 8 ohms, be it 2 x 4 ohms or single 8 ohm loads, so I'm under the impression it's wired in a particular way, externally and internally to reflect back 8 ohms or a split load of 4 ohm.
You wouldn't have some insight to share on this, please?
However I just don't get the wiring of the OT secondaries. The 8 ohm outs appear to have twin leads, orange and yellow. If I got it right the OTs were designed for 8 ohms, be it 2 x 4 ohms or single 8 ohm loads, so I'm under the impression it's wired in a particular way, externally and internally to reflect back 8 ohms or a split load of 4 ohm.
You wouldn't have some insight to share on this, please?