How to Connect Reverb to Original IIC+

[markiicplus]

During a move, my IIC+'s reverb tank accidentally got disconnected. From what I see, it is 1 shielded RCA cable and 1 unshielded.

So, I plug in my shielded RCA cable to what I believe is the closest RCA jack (looking at the back panel) and then the unshielded RCA cable goes directly behind that.

However, it is not working. It was working prior to the move.

Blue circle plugged into the blue circle for shielded RCA. Red circle plugged into where the red arrow is pointing for unshielded RCA. I even switched them just to see if it would work. It's not working. Am I missing something? I ask because there is an "Ez Rv" with an arrow pointing to the 1/4" jack to the right of where I plugged in the shielded RCA but I don't believe that jack was used.

 

[Jay Omega]

During a move, my IIC+'s reverb tank accidentally got disconnected. From what I see, it is 1 shielded RCA cable and 1 unshielded.

So, I plug in my shielded RCA cable to what I believe is the closest RCA jack (looking at the back panel) and then the unshielded RCA cable goes directly behind that.

However, it is not working. It was working prior to the move.

Blue circle plugged into the blue circle for shielded RCA. Red circle plugged into where the red arrow is pointing for unshielded RCA. I even switched them just to see if it would work. It's not working. Am I missing something? I ask because there is an "Ez Rv" with an arrow pointing to the 1/4" jack to the right of where I plugged in the shielded RCA but I don't believe that jack was used.

You have the cables reversed, gray one should go in the jack right by the V3 tube. The 1/4" jack you're referring to is where you connect your EQ / Reverb footswitch cable.

 

[markiicplus]

You have the cables reversed, gray one should go in the jack right by the V3 tube. The 1/4" jack you're referring to is where you connect your EQ / Reverb footswitch cable.

That did it! Thank you so much. Weird, when I hooked it up that way before it didn't work. Maybe I didn't secure the connection as well as I could have. Hope this can help someone else in the future.