ok so I'm still new to midi and the way it controls stuff
i currently have
.triaxis - T C electronics G major 2 - mesa 2:90 - recto slant 4x12 cab
also
Roland JC120 - lonestar 2x12 cab modified to be stereo
i blend the triaxis on clean with the JC120 with a mesa switch track(both on at the same time)....... but use the gain/crunch channel in the triaxis by its self
i need to be able to switch from clean(both amps) to crunch (one amp)
so i managed to get a voodoo labs ground control pro board(cheaply)
so i still need to learn how to program the TC and the board but i first need to learn how to wire this up???????????????????
so i assume i start at the board with the 7 pin midi out and go to the 7 pin in on the triaxis----ill be using this to power the board with the phantom power......... where do i go from here?? its all 5pin midi from here do i go to the tc or the switch track first????? please help lol
jak
i currently have
.triaxis - T C electronics G major 2 - mesa 2:90 - recto slant 4x12 cab
also
Roland JC120 - lonestar 2x12 cab modified to be stereo
i blend the triaxis on clean with the JC120 with a mesa switch track(both on at the same time)....... but use the gain/crunch channel in the triaxis by its self
i need to be able to switch from clean(both amps) to crunch (one amp)
so i managed to get a voodoo labs ground control pro board(cheaply)
so i still need to learn how to program the TC and the board but i first need to learn how to wire this up???????????????????
so i assume i start at the board with the 7 pin midi out and go to the 7 pin in on the triaxis----ill be using this to power the board with the phantom power......... where do i go from here?? its all 5pin midi from here do i go to the tc or the switch track first????? please help lol
jak