hal9000
Well-known member
Here are two clips I recorded Saturday morning with my newly purchased SM-57 and e609 mics. The SM-57 is fully left and the e609 is fully right for both so you can hear the difference and combined tones.
What the Hell Does hal9000 Have?
hal9000 Will Rock You!
Here is the setting I used:
On the AiC clip, I used the same EQ, but with the gain up to 12:00, on Contour, and no Germania. On the Queen clip, I recorded like it shows. The master is misleading because I'm actually attenuating the loop with my FX mix pot master set around 2:00 (the Hot Plate is set to 0 dB so it's not attenuating at all). Finally, I used my Ravelle Limited's bridge SD Custom for both clips and my Line6 Toneport UX-2 for both mic preamps and the USB interface.
The tracks are straight-in (i.e., no EQ, compression, FX, etc.)
What the Hell Does hal9000 Have?
hal9000 Will Rock You!
Here is the setting I used:
On the AiC clip, I used the same EQ, but with the gain up to 12:00, on Contour, and no Germania. On the Queen clip, I recorded like it shows. The master is misleading because I'm actually attenuating the loop with my FX mix pot master set around 2:00 (the Hot Plate is set to 0 dB so it's not attenuating at all). Finally, I used my Ravelle Limited's bridge SD Custom for both clips and my Line6 Toneport UX-2 for both mic preamps and the USB interface.
The tracks are straight-in (i.e., no EQ, compression, FX, etc.)