Anyone try the POD HD500

[Assumer]

If so, how does it work with the ED? Thinking of the 4-cable method. Mainly interested in effects only.

 

[creekhed]

If ur interested in Effects only and wanna run 4CM check out the Line6 M13!

 

[primal]

If ur interested in Effects only and wanna run 4CM check out the Line6 M13!

Did you have to do anything for ground loop hum?

I love my Axe FX, but it took me some time and an ebtech hum x along with a small transformer to get rid of all the ground hum when I use the 4cm method with it.

If I was only interested in effects I would have gone that route over the Axe fx for sure.

But being in a small house it is nice to be able to use the axe fx at night through headphones with my tascam.

 

[Assumer]

If ur interested in Effects only and wanna run 4CM check out the Line6 M13!

I like the idea of being able to set up patches of effects and switch at will. M13 I am sure is great but looking at something a little different.

 

[danyeo1]

I tried the HD500 with my Electra Dyne with the 4 Cable Method and it screwed with the tone from the amp. I set the POD to power amp configurattion, and actually every other setting as well with no effects on and it still messed with the tone, and it was obvious and i couldn't deal with it. Sent the POD to the scrap heap. :lol:

 

[creekhed]

As long as you keep the power supply away from your amp you should not have a Hum w/ the 4CM(My setup with the ED/M13 is dead quiet).