about using amp gizmo for switching roadking 2 channel

[ansonsum]

First of all, please don't blame on my poor english...because i am a chinese...
I know that i can change the channel through the amp gizmo,
but i want to ask,will the amp gizmo save my setting of those channel?such as gain level etc
also,will the amp gizmo save my selected channel mode(raw,vintage,modern) in different patch?!
Thanks for all of your answers!!

 

[iceman]

The gizmo can save up to 256 patches. Those patches cannot change the volume, gain or toggle switch settings. It only controls channel selection, reverb, mute, effects loop etc. Basically whatever the footswitch could control the gizmo can control, but nothing extra.

 

[ansonsum]

Thanks!!
actually, i use the GT10 to be my footswitch.
So, how can i save the gain level,and the channel mode in my GT10 patches?

 

[domct203]

Thanks!!
actually, i use the GT10 to be my footswitch.
So, how can i save the gain level,and the channel mode in my GT10 patches?

Hello, and welcome to The Board.

The Roadking is not a MIDI amp. As mentioned you can only control the switching that is controlled by the footswitch. There is no provision in the amp to MIDI control gain settings, EQ settings or channel modes as the amp is completly analog.

Dom

 

[ansonsum]

um...that means i can't use/do anything in order to save the gain level?
are there some possible way if i want to save the setting of roadking 2 into my GT10?

 

[domct203]

um...that means i can't use/do anything in order to save the gain level?
are there some possible way if i want to save the setting of roadking 2 into my GT10?

No, the only thing you can control/save is the footswitch functions.

Dom