I agree with SteveO
Sounds best through the 1X12 Slant matching cab i got. It better..... **** thing cost $450 :D
I honestly would not have bought the amp if the sales guy didn't insist I try the matching cab.
using both my Theile EVM 1x12 with the matching cab IS AWESOME !!
Its a recto (well kind of)
IMO best played through a closed back recto cab
although my ROV 25 Head sounds killer through a theile with EVM12l
Sounds great through my Recto 2x12 loaded with EVM12L's too but a little bit dark.
Also sounds killer through the matching recto 1x12 cab with v30 and a...
Ive had a Mark V for a couple years now. I just picked the Rectoverb 25 Head with matching 1x12 slant Cab. I LOVE IT ! Very easy to dial in , plenty of power to play with a drummer, cuts through the mix great and has its own tone and feel. Plus its so much lighter and easier to move around...
I put a Radial Big Shot Mix pedal at the end my loop chain. Im only using it only for its phase 180 degree switch. Seems to take care of the out of phase problem. Loop sounds killer!
Check out a wet / dry / wet set up.
I run my Mark V dry out to a 2x12 Recto Cab (with EVM 12L)
Then I take the slave out from the Mark V into my G Major 2
Left and right outputs of G Major 2 feed a Mesa 2:50 Power Amp (both channels)
I run a Theile 1x12 cab out of each channel spread apart with...
Check out a wet / dry / wet set up.
I run my Mark V dry out to a 2x12 Recto Cab (with EVM 12L)
Then I take the slave out from the Mark V into my G Major 2
Left and right outputs of G Major 2 feed a Mesa 2:50 Power Amp (both channels)
I run a Theile 1x12 cab out of each channel spread apart with...
I also have a recto 2x12 and mark v head. I also have the same stand as above. This stand is not ideal for a 2x12 cab AND HEAD
There is nothing to keep the head from falling off the back of the tilted cab. (unless you modify it extending the back support arms so that they extend beyond the top...
Thanks for the input.......
The reason I dont want to have the speaker plugged in is that the speaker cab is running out of the Mark V speaker output. The C+ is a head.
As far as the tubes I just figured if they didnt have to be in the Mark IIC+ I would pull them out and perhaps make them last...
If i want to slave my mark II C+ preamp into my Mark V power amp........... if I use the Pre Amp Out / Power Amp In on bottom of chasis of the C+ into the effects return of the Mark V.......
Does the C+ need a speaker load ? is the signal never hitting the power section of the C+?
Thats the...
yeah i freaked out when mine first did it. then i read on here it was happening to others. everytime i hear it ill grab the cable and push it in and it stops
its your footswitch connections. make sure cable is plugged in all the way at the footswitch and at the head.
Mine does this and many others have had the same issue. The connection of the footswitch cable seems to be the culprit.
Im considering selling my beloved C+ only because I am in financial hell right now. Its an original C+ not an upgrade. It has the Export Tranny. No EQ No Reverb.
It sounds amazing. I currently have it in a head cabinet and also have the original combo cabinet that it came in. Im just trying to...