What type of footswitch for Reverb control?

[relivingmyyouth]

Anyone know what type of footswitch is needed for the reverb on/off? I tried a LiveWire solutions switch, but it didn't turn the reverb on and off. I don't know if the switch was faulty, but it wouldn't change the channel when put into that input either.

Does anyone know if the reverb on/off is supposed to be a TRS type connection like the MB footswitch? Anyone using a particular brand of footswitch for the reverb?

Thanks.

 

[djw]

Any standard DPDT switch. Like this:
http://www.pedalpartsplus.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PPP&Product_Code=9001&Category_Code=SWI

Same as the switches on the LSC channel and solo switches.

 

[relivingmyyouth]

Thanks, do you have any information regarding the cable type? Is it a mono or stereo (TRS) cord?

 

[djw]

Just a regular old mono guitar cable will do it. I think in the manual (which addresses all this, by the way) it says to use an unshielded cable, but I don't think this is actually correct as it created some noise when I tried it. But a cheap guitar cable (like a skinny Hosa job) works great.