Triple rectifier - Power reducing

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

komrade31

New member
Joined
Nov 27, 2006
Messages
2
Reaction score
0
Hi. I just bought a Triple Rectifier and I'd like to know if there's a way to safely reduce the power to 100W or 50W?

Thanks.
 
I don't think there is because of the way the circuit is designed. Only the Dual Recs can be reduced.
 
Thanks everybody for all your answers. Just got a mail yesterday evening from MesaBoogie concerning my question. Here it is, if it might help somebody else:

Greetings,

Thanks for your email. You can lower the wattage to 100watts if you like. You should remove the 2 most inner power tubes (6L6’s). If you were looking at the row of power tubes and visually label them 1 through 6, you will want to pull tubes 3 and 4. You will also want to pull any one of the Rectifier tubes and move the speaker output to the 4ohm jack on the back of the amp.

Thanks

Kris

Kris Dilbeck
Product Specialist/Customer Service
Mesa Boogie Ltd.
1317 Ross St
Petaluma, CA 94954
(707) 778-6565 Ext.382
[email protected]
 
well, i have 2 X 60 watt speakers in my cabinet, so i would have to do that if i wanted to use a triple rec.
 
komrade31 said:
Thanks everybody for all your answers. Just got a mail yesterday evening from MesaBoogie concerning my question. Here it is, if it might help somebody else:

Greetings,

Thanks for your email. You can lower the wattage to 100watts if you like. You should remove the 2 most inner power tubes (6L6’s). If you were looking at the row of power tubes and visually label them 1 through 6, you will want to pull tubes 3 and 4. You will also want to pull any one of the Rectifier tubes and move the speaker output to the 4ohm jack on the back of the amp.

Thanks

Kris

Kris Dilbeck
Product Specialist/Customer Service
Mesa Boogie Ltd.
1317 Ross St
Petaluma, CA 94954
(707) 778-6565 Ext.382
[email protected]



Thanks for letting us know this. You may want to contact Kris again and ask him are the manuals going to be updated to reflect this? I know the manual states that it can only be done on the Dual Rec's. (page 9 of 2ch manual and page 14 of the 3ch manual)
 
FJA Mods also told me this was possible. He pretty much advised me word for word. I doubt this would make it to the manual.
 
Back
Top