Triple Rec footswich issue

[donnievaz]

Does anyone have the Triple Rec footswitch pinout? My friend has on and the footswitch isn't powering up. He tested the cable on another amp and it's fine. I'd like the pinout to see if the power pin is putting out current. I've tried searching and googling to no avail.

Thanks

 

[Gnarkill3k6]

Just measure every pin until you get a current...
But, does it switch the amp?

Maybe there is just a loose wire in the switch.

 

[Third Age Amps]

From the prints it looks like pin 7 might be GND, but it looks like there is no one "power pin". Each pin will have a few volts DC on it and depending on which button you hit, that pin (signal) will be grounded, changing the channel, etc ...

If all of the buttons on the footswitch are not working, then open it up and check the plug and all of the connections to the buttons and the buttons themselves. If nothing is loose or broken, it's probably internal and you'll need to pull the chassis and check the switching circuitry.