Jackie
Well-known member
- Joined
- Dec 11, 2010
- Messages
- 812
- Reaction score
- 1
I am lost for words. I haven't played my Tri in about a month due to lack of time and last time I played it it worked fine. Then I come to rehearsal and it sounds like the Gain is stuck on 10. Lowering the Gain to 0 has no effect, it does not even lower the gain, even with the numbers showing 0.0 it sounds like it's on 10. Also the FX loop does not work.
This has happened once before and I attributed it to bad electricity because the 2:90 also shat itself. Back then, I brought it home and it was fine, played it afterwards a couple of times also fine.
What boggles me most is the "solution": I only took it out of the rack and shook it up (because our drummer suggested I "take it home", as in give it some mechanical movement), and it worked fine :x
Any ideas what might cause this? Bad solder joints? Relay issues?
This has happened once before and I attributed it to bad electricity because the 2:90 also shat itself. Back then, I brought it home and it was fine, played it afterwards a couple of times also fine.
What boggles me most is the "solution": I only took it out of the rack and shook it up (because our drummer suggested I "take it home", as in give it some mechanical movement), and it worked fine :x
Any ideas what might cause this? Bad solder joints? Relay issues?