Roadster Combo Reverb Tank Connection

[Garjaye]

Hello...I've searched a bit and couldn't find an answer.

Can someone please tell me, of the two rca cables, which cable gets plugged into which input under the chassis? There is a black rca cable and white vintage style rca cable. How can I tell which rca input each cable gets plugged into respectively? Or does it matter? Thanks

 

[jaw92691]

Hi. My 12ax7's glass broke, and my wires for the output jack on the reverb tank had "cold" solder joints.
I'm repairing it all tonight on my Roadster.
The answer to your question is: the "White" wire connects to the "input" RCA jack on the reverb tank.
The "black" wire connects to the "output" RCA jack on the reverb tank.
That's how it was on mine anyway.
I hope that could be of help.
-John

 

[Garjaye]

Great! Thanks so much for taking the time to respond.

On the chassis itself, near the tubes, would the white wire connect to the nearest RCA jack facing you or to the one behind it? I may be overlooking it, but I can't see if these jacks are labeled against the black hardware.

 

[bendo]

On all of my Mesa Amps, the white wire connects to the RCA towards the back of the amp.

 

[Authorized Boogie]

On all of my Mesa Amps, the white wire connects to the RCA towards the back of the amp.

This is correct. Gray is always to the inside, white to the outside. Thanks!