No sound when I launch my amp

[RJ805]

I have a Triaxis going thru a TC G Major and powered by a 50/50 power amp. It is all controlled by a VooDoo Labs Ground Control Pro. If I let the amp sit for say a week, and go to power it up, everything launches fine, but there is not sound. Volumes are up to decient levels. The tuner is working. If I press the stand-by switch to on, there is sound, but nothing loud. I here the G Major working, but there is no distortion or any major sound to speak of. The funny part of this is that it can be intermintant. Once the amp does produce sound it will be fine until I let it set for a week or two. CAN ANYONE GIVE SOME HELP???

Thanks

RJ

 

[mr_fender]

Isolate the problem. Go through each device one at at time to see where the issue lies. Try plugging your guitar directly into each channel of your 50/50 to see if it is working as it should. If it is, then plug your guitar into the G-Major and plug the G-major directly into your 50/50. Test to see if everything works as it should. If it does, plug your guitar into your Triaxis and plug the Triaxis directly into your 50/50. Through process of elimination you'll figure out which device is the culprit.

 

[RJ805]

Thanks for the advice. I plan on doing that. Will post when that is done and the outcome

Cheers

RJ