NAD: Mesa Boogie Mark VII head. WOW

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Gonna jump in, since alternates are being discussed to once again sing the praises of the Fillmore. I own a Mark V 90 and 25, VII, 2C+, Electra-Dyne and LSS. There is something about the Filmore that always sounds great. It has clean and crunch tones to die for, and excellent but not madman gain. I like the crunch better than the Marks. If that is what you are looking for, def check this amp out. It just works and is dead simple to dial in.
 
Thanks for your detailed response. The reason I asked is because I've read all of your posts and some of you observations of the Mark V I didn't agree with and I was wondering how you came to those conclusions. In the end I just think its subjective. I get the ice pick sound you called out on the "edge" mode, but I think it is easily tamed by taking the tone of my guitar down to 3 then I think 1) the ice pick is gone, and 2) it sounds pretty decent. I do not find the "tweed" sound to be ice picky at all. In fact, I think its a decent representation of a tweed amp, but then it could be argued that my opinion is subjective. Which is fine because I would probably agree. The biggest thing for me on the Mark V is I think it probably sounds better as a head and closed back 4-12 setup. Maybe someday I will be able to confirm that. Even with that, my general preference for speakers is the 20w Greenbacks. I like them better than the typical G12M 25 75Hz's. Finding that in a 4-12 might be hard.

When I got my Mark V I felt that it was the best amp I have owned. I have owned several Fender's including several 60's black/silver bassman amps, a 1969 Bandmaster Reverb that had an awesome clean tone, one of those brown 90's Vibroverb Reverb reissues, and a 1966 Super Reverb. I found that Fender was not enough for me because they are single channel made to be clean amps. I don't like to front load amps so I always hated the drive sound on those amps because of pedals. In general I could not afford Marshall's back in the day because they were "the" hot amp and where I could buy black panel Bassman amps all day long for $125 a Marshall was (if I remember correctly) $400-600. I did, however own a 76 Marshall JMP Master Volume. I thought that amp sounded bad. First it was a Korg distributed amp from what I remember, and what they were doing at the time was deleting the EL34 power tubes in favor of 6550's. 6550's are a very ridged tube, and were not very flattering on that amp...again subjective, but not for me.

I am very much a guitar/amp player. I don't use effects at all. I rarely use the built in reverb on amps. When I saw this Mark V for sale at $1,400 I jumped all over it. I think any Mark you can get for that price is worth it. I usually only use channel 1 or channel 2. I almost never use 3 as 3 has too much gain for me. I do like the amp, but Mesa does pull some marketing crap with their amps. I remember thinking when I got the amp that it wasn't that loud. Eventually I hooked up my scope, tone generator, load resistor, and DMM and performed a little ohm's law to see what the output of that amp was. I don't have the results anymore, but I can say its nowhere near the advertised 90, 45, 10. No mode or channel was able to hit those outputs. That kinda felt like a trend with Mesa because I don't even need to measure a Mark V 25 to know there is no way that amp can do 25w. 2 EL84's are not mechanically capable of producing 25w.

In the end I subjectively would say that I have the best modern Mark. I like the non-repeated modes, I like the tube rectifier to be in the amp, I like the idea of the solo knob, Triode mode adds flavor, I like the variac mode, I have no desire for MIDI or cab clone features so the VII does not appeal to me. I also am curious to understand how they did the bias for the EL34's on the VII. There is this whole procedure that you follow on the V to use EL34, but on the VII you just flip the switch and you are good to go. They do really come close to trashing the idea of running the amp with EL34's in the VII the way the manual reads. "If you run the EL34 tubes plan on keeping a spare set of tubes with you and fuses". "The 6L6 in our opinion is a superior tube". Etc. I'm not suggesting the EL34 is better in the amp because I didn't really care for it, but I find it odd that they downplay using them in the VII manual or at least that is how I took it. Anyhow, thanks and I do like the write-up and even though I don't agree with some of it, it is interesting to read other perspectives.


I am not being subjective on the Mark V90 in general terms; I have played through a few others and though they sounded good. However I am being specific to the one I own. It was a lemon to start with. I could not use the STR440 Mesa tube as they would red plate in 20 seconds to 1 week. Life span was unpredictable. SED =C= 6L6 GC tubes were the only tubes that worked in the amp ran a set of those for 8 month of heavy use. Tried another quad of STR440, red plated shortly after taking the amp out of standby. The SEDs went back in, all was good an ran those until the tone shifed and lost most of the low end. Tried a quad of the Tung Sol 7581A tubes, they lasted about 8 months. After those, I tried the EH EL34. then the JJ 6CA7 that was ok for 2 weeks until the Screen resistors failed. Had to replace all of them. The center pair were completely split open, the ones on the outer pair had some blisters that were suspect. Also had to figure out why the reverb died. JFET gate crapped out. Got it fixed and then ran a quad of Gold Lion KT77 and used on the crunch mode on CH2. That was awesome. Tweed, edge, and all of CH3 was still ice pick. Not just bright sounding. I can tolerate that. This is that glass breaking in the ear drum sound you could not dial out even with the presence all the way out, gain at 9am and the treble at 9am or lower. We are talking physical ear drum pain too. I did not care for that level of pain. I never had the opportunity to own a good sounding Mark V90. Considering the other issues like the impedance problem with the FX loop, just was not worth replacing the lemon with another V90. Besides, the Roadster, Royal Atlantic and the Mark IVB were enough to satisfy me. I sold the IVB when I got into drumming. Some tube rolling did help curb the ice pick problem with the V90. It still sucked but was a little better and less painful. 20 minutes tops was the tolerable time. Then came along the JP2C, that was so satisfactory to me that I gave up on the Mark V90 completely. I only brought it back out to compare to the Mark VII. I have no issues with the Mark V90 in general. there are some great sounding amps out there. Mine on the other hand should never have left Mesa and should have been scrapped from the start. My only regret was not returning it after the over-heating issue and constant red plating problems. Oh well. It is now a test bed for mods and such. I have learned a lot from the amp in general. The story is much longer than that but I shortened it. I had nothing but issues, this or that failed. At least I was lucky never to have to replace the diodes like others have encountered. I do try to refrain from being negative on the Mark V90 so my apologies if that offended anyone. Too bad, I felt the Mark V90 had potential but I guess the only way to get there is to replace the one I have. So I did, but not with another V90. I now have two Mark VII, two Badlanders 100W, two Royal Atlantic 100. MWDR, Roadster, JP2C, TC100, TC50 and a California Tweed. I am done with the Mark V90 headache. Never bonded with it but wanted too.
 
Gonna jump in, since alternates are being discussed to once again sing the praises of the Fillmore. I own a Mark V 90 and 25, VII, 2C+, Electra-Dyne and LSS. There is something about the Filmore that always sounds great. It has clean and crunch tones to die for, and excellent but not madman gain. I like the crunch better than the Marks. If that is what you are looking for, def check this amp out. It just works and is dead simple to dial in.
How would you say the Mark V:25 sounds relative to the Mark V90? I liked sound I heard in some of the videos on the V:25. I have been looking for an ED too, almost bought one but the RA had my interests, and they still do. For me the two RA100s I have are on the top list of go to amps. One is a combo, and the other is a head with matching 412 cab.
 
... I also am curious to understand how they did the bias for the EL34's on the VII. There is this whole procedure that you follow on the V to use EL34, but on the VII you just flip the switch and you are good to go. They do really come close to trashing the idea of running the amp with EL34's in the VII the way the manual reads. "If you run the EL34 tubes plan on keeping a spare set of tubes with you and fuses". "The 6L6 in our opinion is a superior tube". Etc. I'm not suggesting the EL34 is better in the amp because I didn't really care for it, but I find it odd that they downplay using them in the VII manual or at least that is how I took it. ...
I'm sure the issue of EL34's not getting a vote of confidence from Boogie is because of the variety of "inferior" tubes available in today's market. The days of robust, high current, durable EL34's definitely are in the past. As a disclaimer, Boogie just wants to CYA should you want to run in the EL34 mode. The same issues occur in some vintage era Marshalls. This was one of the reasons they were shipping US (domestic) versions of their 100W amps in the early 70's with 6550's and not EL34's. The 6550's were tolerant of higher plate voltages and better at withstanding mechanical failures.
 
I can believe that. Are there limits on using the Mesa STR450 NOS Siemens EL34 in regards to plate/screen voltages? I have a few, they did not do so well in the TC amps, kept blowing the fuses. The same tubes work just fine in the RA100. I assumed it may be due to the difference in operating voltage of the two amps. (RA runs at 400V and the TC runs at 450)
 
Hard to say. since the sourcing of the Siemens of that era have a lot to do with wide specs. My tube spec reference books are not much help when it comes to this period of tube. That's why Aspen Pittman began his Groove Tube Company in order to "bin out" those tubes. (Now owned by Mesa Boogie I believe). The robustness of the earlier EL34's tolerate higher plate and screen voltages that have progressively gotten softer due to the availabilities and manufacturer tolerances for yield improvement. That's why I sourced the Czech Winged C variants as much as I could. They were very hardy and had a nice break to them when driven hard. Contemporary tubes just don't measure up and wear out much faster if you are using vintage amps (eg: Hiwatt, early Marshalls, Sound City, Park) and some contemporary amps from the 80's and 90's. Mesa continues to push the envelope in some of their designs as well.
 
Adding to the free for all :cool: all just one player's opinion.

Well I consider myself to be one of the lucky V:90 owners :) cause for me it's a truly amazing amp. Also have a IIC+, LSS, Stiletto and a Badlander now. Each has their own place, but for gigging live these days the V is my choice basically because of its versatility and tone.

First off I'm not a tube sniffer :LOL: most of the time TBH can't tell if a tube is really making a difference or if it is just smelling. This bums me out, however the V4 -> AT7 move was a biggee, it reduced the harshness of Ch 3. Also replaced the set of STR-440 YELs new STR-441s GRYs in the outer sockets, STR-440 GRNs in the inner sockets. Dang if the Simulclass didn't come alive. Could never get along with Edge but running it with Simulclass and these tubes was a difference maker. In fact the whole amp tone was improved.

Now the IIC+ voicing, well is not IMHO truly IIC+. It's an excellent voicing but compared to the real deal... urrr noo. The real IIC+ is truly an amazing amp, more organic in comparison but is just not versatile enough for gigging as the V.

The LSS cleans are lusher and richer, it's Ch 2 with Drive is so smooth, only the Mark 1 mode kinda comes close but it's a bit buzzy, plus the LSS can't touch Crunch or Ch3 for the heavy stuff.

Now I am a fanboy of the Stiletto and it's really the polar opposite of the V in many respects. It's an untamed beast, the V is well behaved and under control. Nothing compares to Ch 2 Tite Gain or Fluid Drive, its raw and cuts. But it's cleans, while enjoyable are not really in the same ballpark as the V. It's also missing that middle ground for crunch rhythm. You have to OD Ch 1 Tite Clean for that cause Ch1 Crunch is hard to cleanup and it's super bright, even on vol rolldown. Plus the large vol differences with the voicings is a PITA live.

Now the Badlander... this is one very cool amp. Simply a pure focus on Crunch with no distractions. Two duplicate chans and 3 voicings which are essentially are just shades of gain around Crunch. But this Crunch is simply amazing. Its clarity with gain is hard to match. It is an amp that you don't fight with playing and dialing it in is sooo easy in large part due to the simplicity. TBH haven't had as much time on it as the others. It's possible, but not likely, it could push the V aside. The V's got better cleans and with more voicing choices which just has it as the #1 gigging choice for this guy.
 
How would you say the Mark V:25 sounds relative to the Mark V90? I liked sound I heard in some of the videos on the V:25. I have been looking for an ED too, almost bought one but the RA had my interests, and they still do. For me the two RA100s I have are on the top list of go to amps. One is a combo, and the other is a head with matching 412 cab.
I have the combo. Obviously the 90 will get your core thrumming in a way the 25 won't, and the 10" speaker is thinner. But it sounds awesome for its size and you can patch in a 12" to thicken it up. It's one of my favorite amps and the one to grab when I'm going to an informal due to its weight (which is still impressive given its size -- a testimony to Mesa build quality.)
 
So for the past week I've been messing with preamp tubes in the Mark VII, I have tried a few long plate Mullards, Chinese square foil getter 12ax7b, a Phillips 12at7 in the phase inverter and sovtek 12ax7lps in a few positions. At the end of the day, I kind of feel like this amp is designed for the jj tubes that ship with it. The tubes did change things, sometimes for better but at the loss of other things or sometimes for worse. At the end of the day the only thing I kept was a sovtek 12ax7lps in v1. That almost opened up the sound a bit more. Anyone else been messing with preamp tubes?
 
So for the past week I've been messing with preamp tubes in the Mark VII, I have tried a few long plate Mullards, Chinese square foil getter 12ax7b, a Phillips 12at7 in the phase inverter and sovtek 12ax7lps in a few positions. At the end of the day, I kind of feel like this amp is designed for the jj tubes that ship with it. The tubes did change things, sometimes for better but at the loss of other things or sometimes for worse. At the end of the day the only thing I kept was a sovtek 12ax7lps in v1. That almost opened up the sound a bit more. Anyone else been messing with preamp tubes?
not in a VII but in my IV I've been running
V1 NOS Mullard blackburn
V2 High gain JJ
V3 NOs RFT
V4 chinese square foil
V5 Sovtek LPS
I love how mine sounds the RFT is probably the Key , I have 2 in my Splawn and it sounds worlds better than the stock tubes it shipped with.
V4 is the reverb send , and I do not use the on board reverb so I may experiment a little bit with that slot
I also have some NOS GE, Raytheon , Amperex and tungrams to mess with , but it sounds so good as is I'm in no rush to mess around with it at the moment.
 
Mark VII tube rolling, this one is trick as the lead drive insertion point moves around for two modes (crunch and crush). So what other than the stock Mesa branded JJ ECC83s would be ideal? have no clue. I have only experimented with the power tubes. I did not care much for the STR445 green bias tubes. Yellows were way better especially at gig level. A blend of STR448 (6L6) in a red bias color and the STR445 in yellow were good as well. Running all the same tubes (STR445 yellows).

Some like the RFT in V1 in a mark amp. I have not explored that much. I have all of the RFTs stuffed in two RA100 as those were needed to tighten up the amp and strip out the mud on the hi gain channel. RFT in V1 and an Ei CV492 in V2 (similar to a Mullard long plate 12AX7). Ei CV492 in the phase inverter as well.

I did experiment with alternate tubes in the JP2C just to see what would happen. Well, I wound up with the same result as @endofall , the stock JJ ECC83s were the best. Had the same result with the MWDR.

Badlander, needs to be explored as it is a Mark + Recto hybrid amp. I have only experimented with Mesa branded power tubes. May have tried a 12AX7 variant like the old Mesa Chinese 12AX7 tube. I do have one spare RFT not used. Most of the one's I got are in the pair of RA100s. Thinking the RFT in V1, Ei CV492 in V3 , NOS Mesa 12AX7 (Beijing 6N4-J Chinese 12ax7/7025/ecc83) in V3 and V4 and not sure what to stuff in the phase inverter. Tempting. May be the fix for gain issues vs doing a circuit mod. I feel the BAD is fine as it is but exploring the potential can be fun.

Amps that had good results with some alternate tubes not using stock Mesa branded JJ ECC83s: Roadster, RA100, and the Mark V90. I would have to see what I used in the California Tweed, I did swap out some of the stock tubes in that as well. I keep forgetting about that amp.
 
I tried to see if the EL34 (STR447) sounded different in the Mark VII than the STR445 (6L6GC) stockers. The EL34 were grey bias color coded and the 6L6GC was yellow. Since I have two Mark VII, it was finally that time to hear the difference. To my surprise, there was no notable difference at all. If it was there, I was not hearing it. Had both amps dialed in as close to each other as possible. So that ends that. Sometimes you think there was an improvement but in reality, nothing really changed. Sure, it depends on the amp in question if there is a notable difference. With the Mark VII, I did not take notice to any tone difference or offset of volume shift. OK, I did not push it into gig level this time around, but did explore the three power modes and the various modes. My hearing may still be off from yesterday.
 
I tried to see if the EL34 (STR447) sounded different in the Mark VII than the STR445 (6L6GC) stockers. The EL34 were grey bias color coded and the 6L6GC was yellow. Since I have two Mark VII, it was finally that time to hear the difference. To my surprise, there was no notable difference at all. If it was there, I was not hearing it. Had both amps dialed in as close to each other as possible. So that ends that. Sometimes you think there was an improvement but in reality, nothing really changed. Sure, it depends on the amp in question if there is a notable difference. With the Mark VII, I did not take notice to any tone difference or offset of volume shift. OK, I did not push it into gig level this time around, but did explore the three power modes and the various modes. My hearing may still be off from yesterday.
Hey Bandit:

No small thanks to you, I grabbed quad of Boogie EL34s. I did notice a difference - a bit less density, tighter low end, and just a bit less wooly. LOVE both options. Here's clip of them double tracked - EL34s, 6L6s, then both with EL34s on the left https://www.dropbox.com/scl/fi/eev7fq11n21msvr83yaci/Mark-VII-EL34-GL6-BOTH.mp3?rlkey=1vcfey3od2wxt6ptikt1ebegu&dl=0

Thanks again for the inspiration to do this - appreciated. To anyone thinking of trying this out, I'd suggest putting a piece of tape with BIAS written on it as a reminder to flip the bias if you're going to go back and forth. It's easy in the excitement to forget:)
 
Tighter low end w/EL34s? That's the opposite of what I would expect.
Since I have two of these, I compared on with the STR447 EL34 and the other with the stock STR445 6L6 tubes. I was surprised how the two Mark VII compared with the different power tubes. The STR445 tubes have a slight 6CA7 voice to them, that being based on Mesa's description along with the JJ description. The STR447 EL34 were used but were still good.

I could not tell the difference with the side-by-side comparison of the EL34 vs 6L6 (str445) in each Mark VII. At least it is not a compromise on tone. There will be some notable differences with the Mark VII if you run the other 6L6 tubes like the STR440, STR441, STR443, STR448 and including the STR415 (have a set I bought for the JP2C). Some slight boxy undertones take shape. That I did not expect. Did not sound bad though, just different.
 

Latest posts

Back
Top