Mesa sus-4 rack... turn cover into a pedal board...

[theaero]

So since the fronts and backs of the mesa sus racks are flat as opposed to not flat, I was thinking. Would it be possible to mount a ground control pro onto the back of one of the covers, assuming it wouldn't hit the gear? That way, i could just take off the cover and put it on the stage and be ready to rock.

However, what concerns is me that the GCP would be stored sideways.

Any ideas on a good method I could do to store my pedal board (which only consists of a volume pedal and GCP) inside of my rack for transpo?

 

[6L6C]

It’s a cool idea and I would see why you want to do it. But I don’t think you can do it with a sus4 don’t forget when you put that door on you lose about a ½ inch all around the door right there (for the seam).
I know I could not do it with my Rocktron All Access and that is roughly the same size as the Ground Control. But putting that aside gear clears and no rear rack rails.

But here is a mounting idea if everything else looks good
http://forum.grailtone.com/viewtopic.php?t=16134&highlight=bike
Go seven users (right under me) down he uses bike chain and there are great photos included

 

[theaero]

yea, but i dunno if that would fit on a sus rack =\



Hmm...