0mn1p0tent
New member
- Joined
- Mar 14, 2011
- Messages
- 4
- Reaction score
- 0
Using a Mesa Roadster controlled by a with a Mini Amp Gizmo (MAG) and GT-10.
MAG changes channels when I switch patches just fine. I now want to use CTL1 and CTL2 as latched switches for solo and reverb functions.
Here is the problem:
No matter what I configure the CTL1 and CTL2 switch modes on the GT-10 they function as momentary instead of latched (toggle). I can get solo, mute and revered to work with MIDI CC but I have to keep the switch pressed.
Anyone else using this combination of gear and experienced this issue? How did you solve it? I have written to RJM and will now try Boss to see if they have
a solution.
Workaround:
Duplicate patches stored in sequence one without and one with solo then advanced patches to get the boost. With some songs requiring more than one solo boost and effect toggles this might be cumbersome.
MAG changes channels when I switch patches just fine. I now want to use CTL1 and CTL2 as latched switches for solo and reverb functions.
Here is the problem:
No matter what I configure the CTL1 and CTL2 switch modes on the GT-10 they function as momentary instead of latched (toggle). I can get solo, mute and revered to work with MIDI CC but I have to keep the switch pressed.
Anyone else using this combination of gear and experienced this issue? How did you solve it? I have written to RJM and will now try Boss to see if they have
a solution.
Workaround:
Duplicate patches stored in sequence one without and one with solo then advanced patches to get the boost. With some songs requiring more than one solo boost and effect toggles this might be cumbersome.