Mesa quad lead 1 channel

[Marcelsell]

Hi,

I own a Mesa Quad. The sounds are very good after some tweaking. I replaced the tubes and the quad is recapped.

I want to use my quad as followed

Channel 1 clean
Channel 2 clean with a little bit of gain
Lead 1: 80s chruch
Lead 2: modern gain

I covered channel 1,2 and lead 2 but lead one sounds blurry in the low, almost like a fuzz. Is it a defect in the amp or normal for the lead 1.

(I used other guitars, cables, poweramps so the problem is the quad)

Can someone help me out with this?

Marcel

 

[little-b]

Not sure whats going on there.check the sample settings in the manual.start from there.

 

[Rob227]

You are going to have to make some sacrifice on one of the channels. What I found worked well was to use the manual settings for R and L 1. This is going to give you a very clean clean and on L 1 it seems to sound like a Santana lead. You'll be able to find it in the manual as the recommended setting with a strange M shape on the GEQ.