Mesa MKIIC+ reverb pluqs question

[nEztor]

Hello!

I got today my "hard to find" boogie, MKIIC+. Thank you Sunday punch!!!

I have one question: How / where i plugged reverbtank plugs. I can see only one RCA on amplifier chassis.

Here is link to photos:
http://maxillaris.tripod.com/mesa_mkiic/index.album/reverb_holes?i=1

Clock is so much here in Finland that my first testdrive is tomorrow morning. I'm glad if somebody can help me. Plugging chords aren't harmfull for neighbours

Thank you everyone who can help me!

 

[MrMarkIII]

The other RCA is closer to the pre-amp tubes, to the left (looking at the photo).

 

[nEztor]

Thank you! I thinked that it would be that

Can any advice which cord to right hole. My mark III have only grey chords.
MKIIC have white(winged) and grey chord. Which hole i plugged that funny "wing-chord"?

Thank you for advices!

 

[tony777]

I don't think it matters, but my amp has the white wire with the wing plug at the outer socket. (right side on your photo) and the grey at the one in line with the preamptubes.

Tony

 

[nEztor]

I don't think it matters, but my amp has the white wire with the wing plug at the outer socket. (right side on your photo) and the grey at the one in line with the preamptubes.

Tony

THANK YOU TONY!

 

[Boogiebabies]

Gray on the preamp tube side and white on the power tube side.

 

[nEztor]

Gray on the preamp tube side and white on the power tube side.

Thank You BB!

Can you say, why there is ground-lead between grey and white chords?

 

[Boogiebabies]

The washers used on the jack with the white connector corrode, so it shares the ground with the other jacks ground. It's a Mesa repair known as the one wire mod.

 

[jvk]

I can never remember which reverb cable goes where. Gonna write it down for once