Mesa Boogie Rectifier 2x12 cab speaker change

[NorCal-Mesa]

Ok I got a new Mesa Rectifier cab with Mesa Black Shadows in it 2x12 running 16ohms. I like my Mesa Recto cab 2x12 with vintage 30s in it better. I lost ALLOT of the low end thump with this cabinet (not sure why). I play metal and some rock, is it difficult to change out the speakers? If so where is a good place to buy some new speakers? Thanks

 

[Third Age Amps]

It is very easy. Unscrew the back panel and jack plate, push the jack plate through it's hole and lift the back panel off. Then you'll either have to de-solder the wires or just pull them off if they have spade connectors. Then use an 11/32 nutdriver to remove the four nuts on the speakers and voila!

Reverse the process for installation.

I prefer WGS speakers in Kentucky. They are bulletproof and inexpensive. I recommend combining the Veteran 30 with the ET65 and you will get the tone of your dreams! I have it in a vert slant cab and it sounds incredible. Full and chunky mids with smooth lows and sparkly highs.

 

[kdorsey]

I prefer WGS speakers in Kentucky. They are bulletproof and inexpensive. I recommend combining the Veteran 30 with the ET65 and you will get the tone of your dreams! I have it in a vert slant cab and it sounds incredible. Full and chunky mids with smooth lows and sparkly highs.

I can't improve on that! 8) The ET65 in the top position smooths out the ice pick found in other speakers.

 

[NorCal-Mesa]

Thanks guys that's helps out allot...Do you have a website for those speakers?