I am getting no sound at all from my mark v head
Amp turns on, all tubes light up as normal
Turn on from standby and nothing happens
Replaced v1 and v7. Still nothing
Foot switch cycles through all functions and all lights function on the amp
Checked power tubes after operating for five minutes, 3 of the 4 are hot, the far right tube just warm
This all started when I turned the amp on to check it after I had a lightning strike destroy 3 TVs and a computer in my house. Everything plugged into the same circuit as the amp are working fine.
Not sure what else to check
Any help would be appreciated!
Amp turns on, all tubes light up as normal
Turn on from standby and nothing happens
Replaced v1 and v7. Still nothing
Foot switch cycles through all functions and all lights function on the amp
Checked power tubes after operating for five minutes, 3 of the 4 are hot, the far right tube just warm
This all started when I turned the amp on to check it after I had a lightning strike destroy 3 TVs and a computer in my house. Everything plugged into the same circuit as the amp are working fine.
Not sure what else to check
Any help would be appreciated!