Mark IV channel switching cables

[primalinstinct]

Hi All,
What type of cables do I need for switching the mark IV channels on the back? Im going too be connecting this too a GCX switcher. Will standard 1/4" cables do .. or do I need stereo TRS cables?
Thanks!

 

[Shep]

it should be a tip to ground short. so 1/4" is the one to use..

 

[NoGlassNoClass]

Regular 1/4", does not need to be TRS. Use speaker wire...no audio signal here so you dont need the shielding of instrument cable, plus heavier gauge conductors in spkr wire=better reliability. It's cheaper too!

 

[Tuna141]

You can also use a regular guitar/instrument cable with no problems too. Just about any cable with a 1/4" plugs will work fine.