Line 6 M9 question

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

howdycb

Member
Joined
Jun 2, 2008
Messages
13
Reaction score
0
Hi All,

I own a 5:50 really happy with it. I am looking into multi-effects units and like the simplicity of the Line6 M9. However ...

I would like to place the M9 in the loop. I really really wish that they would include a port that would allow channel switching in the amp (ala Boss GT#). So ...

Due to wishful thinking I stumbled across the following idea: is it possible that the expression pedal ports of the M9 might function as a latch switch? The Express channels can be switched red/green via the 1/4 port when this port "sees" an open/closed circuit. This can be done with a simple latch switch (I use a Boss FS-5L switch to do this currently). The expression port on the M9 responds to a 0-25 Kohm pot of a simple volume pedal. If the expression port of the M9 is connected to the Express port, could the Express "see" the the same thing (an open/closed circuit)?

I know this is a shot in the dark and the question will likely be filed with "foot switchable clean/crunch possiblities", but I just had ta ask ...


Happy Thanksgiving
cb

ps ... I know that it is officially called "double posting" but I posted this question in the "Effects" section too ...
 

Latest posts

Back
Top