Lights Out
Well-known member
- Joined
- Oct 6, 2005
- Messages
- 73
- Reaction score
- 0
Hi
I just received my High gain Kit for the Boogie MKIV
I thought I'd compare the 6L6's before I re-tube the whole amp
(Pre & power amp stages)
I had the Mesa STR-420's in the amp since I bought it , which I dont mind but have never compared other Power Valves in this amp.
So I took the plunge & orederd the JJ's
The JJ6L6GC's dont fit as tight as the Mesa STR-420's they feel like the might fall out in transportation. I'll have to look into that & tighten up the sockets . Which dosent look easy because the Combo dosent give you much room to move around.
BTW Bob at Eurotubes does mention this & he was right .
Firstly Yes , they are some what Darker with the Top end rolled off which sounded kind of weird at first , there seems to be alot more compression & Gain on R2 & Lead Channels at lower volumes.
I didnt think that would happen untill the power
Valves were pushed harder ?....Interesting any comments on this guys ?
Dont know if it was the Tubes but the Clean Channel was alot quieter too
I had to turn up the Gain from 5 to 9.
After changing the EQ settings it is starting to sound pretty good .
I mainly played around with R2 & was able to get tones close to My favourite tones
Accept " Balls to the Wall"
Dokken "Under Lock & Key"
And AC/DC "Back in Black"
Just took a 30 minute break while writing this thread & Kranked the amp a little more
It is very punchy now with alot of Clarity on the top end
(No Blanket over the speaker tone) some guys speak off.
Actually the Bass & Mids seem to be Rolled off the louder I get.
Thats with a Duncan JB Humbucker & 2 Dimarzio VV's
Going into an old cab with Blackback G12H-30's
I just received my High gain Kit for the Boogie MKIV
I thought I'd compare the 6L6's before I re-tube the whole amp
(Pre & power amp stages)
I had the Mesa STR-420's in the amp since I bought it , which I dont mind but have never compared other Power Valves in this amp.
So I took the plunge & orederd the JJ's
The JJ6L6GC's dont fit as tight as the Mesa STR-420's they feel like the might fall out in transportation. I'll have to look into that & tighten up the sockets . Which dosent look easy because the Combo dosent give you much room to move around.
BTW Bob at Eurotubes does mention this & he was right .
Firstly Yes , they are some what Darker with the Top end rolled off which sounded kind of weird at first , there seems to be alot more compression & Gain on R2 & Lead Channels at lower volumes.
I didnt think that would happen untill the power
Valves were pushed harder ?....Interesting any comments on this guys ?
Dont know if it was the Tubes but the Clean Channel was alot quieter too
I had to turn up the Gain from 5 to 9.
After changing the EQ settings it is starting to sound pretty good .
I mainly played around with R2 & was able to get tones close to My favourite tones
Accept " Balls to the Wall"
Dokken "Under Lock & Key"
And AC/DC "Back in Black"
Just took a 30 minute break while writing this thread & Kranked the amp a little more
It is very punchy now with alot of Clarity on the top end
(No Blanket over the speaker tone) some guys speak off.
Actually the Bass & Mids seem to be Rolled off the louder I get.
Thats with a Duncan JB Humbucker & 2 Dimarzio VV's
Going into an old cab with Blackback G12H-30's