I need Help- triaxis and digitech 1101

[bro]

I am about to pack it in on the digitech 1101.I can not get it working right with my triaxis.
I tried setup 6 and 7.Setup 7 worked much better than 6.
Both ways i am getting either alot of noise or weird sounds .
Does anybody got them working good together?And if so,what setup and how are you connected?

 

[dass101]

It's been discussed before here, but the first thing you NEED to do is get yourself a hum eliminator (Morley, Ebtech, Behringer) Put it between the send output of the GSP and the input of the Triaxis. It will solve most of the hum and whooshing strange sounds. You will notice a bit of a higher noise floor, but I find it is usable except probably with extreme gain settings.

 

[bro]

cool
what do you mean extreme gain settings?

 

[dass101]

Well, the LD1Red, which is already quite noisy, is getting a bit unusable with that added noise.

I am using pretty hot pickups, and my main drive sound is LD2 yellow, with about 7.5 gain and around 5 drive. With these settings I find the noise level within the acceptable ranges.

Also, did you get the new beta firmware for the GSP ? That fixes the noise gate position, and you have it after the external preamp, and that helps quite a bit.

 

[bro]

i guess that is where my problem is.
I use ld1 red almost all the time