HELP!

[nexus]

what is that machine that switches triaxis to channel 1 and multieffect (tc g-force) to preset 2?
i would like to do any mix of those presets.

hope you get the point

And good foot control that can take effects off and on without channel/bank change.

 

[disassembled]

Do you own a midi controller? You can map your presets within each device to achieve the same effect but the Behringer FCB 1010 will do this along with a bunch of other controllers.

The behringer can also be programmed to do what you're talking about as far as turning on/off individual effects in the g-force.

Greg

 

[nexus]

yes i have lexicon mpx ri foot controller. But it is hard to dance with that fx mode switch. You have to press that on before you can take off effects.

And i think there is something that can take midi in and split it to 2 units or more. and tell triaxis to go different channel than g-force

Now i can press example bank number 1 and both units take preset 1.

If you use different bank of triaxis with every song, you can get only 12 song to your set... But if i can get that "something" that has millions of banks, and presets and effects comes from other units...

 

[disassembled]

Like I said you can do this with the Behringer FCB 1010.


Greg

 

[nexus]

ok, thanks. I take a look

 

[18&Life]

go to the g-force midi map screen and program it to when it receives
midi program 1 wich comes from triaxis,g-major will assume program 1 = program 2
So when you push buttom 1 in your midi control,triaxis will change to program 1 and g-major to program 2 or whatever you've programed in midi map screen of the g-major.
Very simple :wink:
luck

 

[nexus]

but how can i get more banks? just wanna have own bank to every song.
i have fine presets, but its hard to use them if you have to change a bank.

So if u have enough banks, you can use same presets, but at different banks.
Triaxis has 128 presets. its 12 banks with 10 presets...

hard to explain

 

[18&Life]

ask your manual,I don't get it
the best answer is in your manual,if you don't have it dowload it from the net :wink:

 

[disassembled]

You only get 90 channels on the TA and 128 on most midi gear. The Behringer lets you select 100 channels and each button can be programmed to do much more than selecting a channel. Do you honestly need more than 100 channels? You will only be using up to 90 channels on the TA which is hard to believe you would have the need for 90 seperate channels (especially when you can use continuous controllers to change parameters one channel can have many sounds).

Most times it's better to not change presets if your sound is essentially the same but you want to add or take away certain effects.

The behringer has 10 banks of 10 footswitches which can be programmed in any manner.

At this point I have no idea what you are asking as I believe I have answered your question several times already.

Greg

 

[nexus]

ok. lets say it this way.

song 1 i use bank 1. there is pres 1 heavy riff. pres 2 riff with some delay, but not so heavy. pres3 clean. pres4 rock lead. pres5 solo with delay. pres6-10 are empty, i dont need more at this song.

song 2. bank 2. pres1 same heavy riff thats allready at bank1 pres1. (and this has taken now 2 places of my channels, but i want it here because this is other song and other presets are different. maybe clean with some huge delay. rock lead, but less drive.

if i´m at song 2, i don´t wanna jump to bank 1 to use that heavy riff

so, if i make several songs like this, 10 banks are not enough...

somehow people does this, but how they get enough banks, or i´m doing something wrong here

sorry my bad english...