Tacoguitar
Member
- Joined
- Mar 30, 2010
- Messages
- 6
- Reaction score
- 0
Hello everyone, I was just jamming and since I bought my amp a couple days ago i decided to use the footswitch to switch around channels, it was still in its plastic. So i connected it and starting playing with it. However, it does not switch channels (Burn to Clean), the only thing it allows me to do is turn on/off the contour and the reverb ONLY when the channel switch on the amp is in the channel 2 position. When I turn the channel switch on the amp to the FTSW position the foot switch does not light up at all, i press buttons and nothing. The same thing happens when I turn the channel switch on the amp to channel 1. Did I get a defective one?