Footswitch for DC5

[Allmostawake]

Since you can switch Reverb, Channels & EQ on a DC5 is there a switch that will do all 3?

 

[wickedgtr1]

You can easily make one --- there is nothing special about the foot switch for these model(s).


Basically, the Channel/EQ use the front jack using a TRS cable, Sleve is ground for both, each connect through the SPST Latching switch then through a LED, one to the Tip, and one to the Ring. The Reverb is pretty much the same, although, I cant remember if the Reverb supports an LED, it should, I will confirm for you tonight.

PM, and I'll draw up a schematic, and give you part numbers for what ever local electronics store you live near. --- But it should be really cheap, and really easy to make.

 

[wickedgtr1]

I will get that written up tomorrow.

 

[wickedgtr1]

Hand Drawn in MS Paint --

http://members.cox.net/wickedgtr1/Switches.JPG

 

[desertcj]

Nice Little Schematic. I wonder if we can find housings like the F-100 and use that to make a custom footswitch. We could always mod our DC's to have a midi plug in the back like the F series and just wire the footswitch to one jack. We'll have to talk about it when you get back from Sedona.