Commander Coo1
Well-known member
- Joined
- Dec 18, 2005
- Messages
- 234
- Reaction score
- 0
so i did the mod last night, i hear a lot of people saying that the fx loop is unusable cause its parallel not series. i found some instructions on the boogie board and did it to my amp.
before:
the i removed the green wire from the mix pot, and moved the orange wire on the mix pot to the middle lug where the red wire is, so it basically just bypasses the mix knob so the wet signal isnt mixed with the dry signal. just goes out then back in.
after:
i cant believe people pay $75-$100 to have this done... it takes 5 minutes. it sounds pretty good, but i didnt mind the parallel loop before, they both work well with my rv-3.
before:
the i removed the green wire from the mix pot, and moved the orange wire on the mix pot to the middle lug where the red wire is, so it basically just bypasses the mix knob so the wet signal isnt mixed with the dry signal. just goes out then back in.
after:
i cant believe people pay $75-$100 to have this done... it takes 5 minutes. it sounds pretty good, but i didnt mind the parallel loop before, they both work well with my rv-3.