Comparing Boogies with a George Lynch Tripler

[dancullinane]

Well, this may not specifically relate to Boogies but thought I might ask the board anyway. I bought one of these Morley Tripler to directly allow me to compare my Boogies (IIC+, IIB, IV). I'm hoping to post a review comparing these 3 beasts.

With one amp it works fine, but I get a bad hum when hooked up with 2 or 3 of the Boogies. Have I just created a ground loop? I seems to only come from one of the amps at time. Is there a way to eliminate the hum when using one of these switchers?

Thanks
DC

 

[siggy14]

do you have all three amps plugged into the same power source? Like a power strip?

 

[Fernando]

You will probably still have a ground loop plugging into different power strips. You need a splitter that has "ground-isolated" outs. Something like a BS2 from axess electronics. Check out:

http://www.axess-electronics.com/

good luck!!

 

[dancullinane]

Yes Siggy. They were all plugged into the same outlet, through a power strip

 

[dancullinane]

Yes Siggy, they were all into the sam outlet via a power strip.

 

[Shep]

ground loop.. go back to were you got your tripler and get somehting with buffered in's and out's..that way no ground problems.