sted
Well-known member
- Joined
- Feb 21, 2010
- Messages
- 172
- Reaction score
- 0
Hey guys,
I just purchased a spanking Matamp 2x12 cab to use with my combo, very happy with the sound as I demo'd loads of speakers with my combo speaker and settled on the Celestion G12K 100's, very nice!
My question is one of impedances really, the combo speaker is usually plugged into the 8 ohm output and the new cab is 4 ohm, the guy from Matamp said it would be fine to just plug the cab into one of the 4 ohm outlets and keep the combo where it is, I cant find anything in the manual about an 8 ohm and 4 ohm setup though I'm assuming that running both the internal speaker and cab speakers from the 4 ohm sockets would also be a safe mis match?
I'm pretty sure the guy was right as Matamp make top notch handmade amps and cabs but I just want to be sure!
cheers guys
I just purchased a spanking Matamp 2x12 cab to use with my combo, very happy with the sound as I demo'd loads of speakers with my combo speaker and settled on the Celestion G12K 100's, very nice!
My question is one of impedances really, the combo speaker is usually plugged into the 8 ohm output and the new cab is 4 ohm, the guy from Matamp said it would be fine to just plug the cab into one of the 4 ohm outlets and keep the combo where it is, I cant find anything in the manual about an 8 ohm and 4 ohm setup though I'm assuming that running both the internal speaker and cab speakers from the 4 ohm sockets would also be a safe mis match?
I'm pretty sure the guy was right as Matamp make top notch handmade amps and cabs but I just want to be sure!
cheers guys