MusicManJP6
Well-known member
I just started messing with impulses and they really do sound amazing! I found a ton of good ones over at the guitarampmodeling.com forums. This is really an awesome way to get killer tone fast! They allow you to use your Mesa's slave out and record direct to your PC! It works with any preamp input - even a modeler like a POD or BOSS GT-8 (just turn off the cab and mic sims on the unit). All you have to do is insert a VST plugin like keFIR (it's a free convolution plugin) as an effect after your signal in your DAW, load an impulse file, set your mix to 100%, and prepare to be blown away! Most of the ones i've found sound better than any attempt i've made at micing a cab on my own. And you can experiment with different mics and cabs in seconds.... just by loading up a different impulse file!
If you have no idea what i'm talking about then check out the stickied threads at the top of this forum link:
http://guitarampmodeling.com/viewforum.php?f=32&sid=8fdf9a3185c04e001c3465f42ee1cb52
I'll be messing with recording using impulses some more tonight. I'm going to bypass the loop on my Stiletto for the first time ever! :twisted:
If you have no idea what i'm talking about then check out the stickied threads at the top of this forum link:
http://guitarampmodeling.com/viewforum.php?f=32&sid=8fdf9a3185c04e001c3465f42ee1cb52
I'll be messing with recording using impulses some more tonight. I'm going to bypass the loop on my Stiletto for the first time ever! :twisted: