2:90 plops

[riveratbr1]

I have a Triaxis and a 2:90. When I switch the modes on the 2:90 using the Triaxis, I hear a plop. Sometimes it plops louder then the other times.

The plop does not sound louder when I turn up the volume on the amp or Triaxis.

It is the same sound when you use a 1,5volt battery and connect it to a loudspeaker.

What is the problem and how do I fix it?

Thanks

 

[FBMG]

The "plops" you hear are usually associated with any 2:90 switching between full and half drive settings. If it bothers you I would suggest using 2:90 modes of the same power rating. I will say though that live it won't be much of a problem. Good Luck!

 

[riveratbr1]

The "plops" you hear are usually associated with any 2:90 switching between full and half drive settings. If it bothers you I would suggest using 2:90 modes of the same power rating. I will say though that live it won't be much of a problem. Good Luck!

So it is normal then?

 

[FBMG]

Right. Mine does the same thing. As you said earlier, the noise doesn't increase as you increase the volume, so at gig levels it's less noticeable.

 

[joey_truelove]

If you have a sensitive ear that 'plop' might be the cooling fan starting and stopping.