Dude
New member
- Joined
- Feb 21, 2014
- Messages
- 2
- Reaction score
- 0
https://dl.dropboxusercontent.com/u/103541694/Nomad 1.JPG
Hope the photo works ok.
Hi guys, first post.
I've got a problem with my Nomad 45.
Blue disc shaped thing rattling around in the amp. I know where it came from as I've looked at other photos on the net. Is it safe to re-solder back in and can it be soldered the wrong way round? It is difficult to solder in place so is it worth soldering in two extension wires to make it easier? Is this a job for an amp tech given that there also appears to be some burning on the white cable connector?
I'm good with a soldering iron but have no knowledge of amps.
Please advise, many thanks
Hope the photo works ok.
Hi guys, first post.
I've got a problem with my Nomad 45.
Blue disc shaped thing rattling around in the amp. I know where it came from as I've looked at other photos on the net. Is it safe to re-solder back in and can it be soldered the wrong way round? It is difficult to solder in place so is it worth soldering in two extension wires to make it easier? Is this a job for an amp tech given that there also appears to be some burning on the white cable connector?
I'm good with a soldering iron but have no knowledge of amps.
Please advise, many thanks