Triaxis Output 2 broken???

[NOT!!!]

Hi!

I just realized, that my Output 2 of the Triaxis doesn´t work. Is it like with a piezo guitar, that it only works, if a cable is jacked into output 1? Or is it really broken?


What would it cost to reapir? Everything else works fine!


Thanks!


btw: I checked the manual and found nothing!

 

[disassembled]

There are 4 outputs on the triaxis: main A, main B, recording A, recording B. Which are you having a problem with?

Greg

 

[NOT!!!]

main b, which is called Output 2

 

[disassembled]

Is the output knob on the front turned up?

Greg

 

[18&Life]

they have to work separately.
A few months ago I used only output 2 because it was closer to the input of my fx.
Now I changed my fx and output one is closer to it.
So they have to work separately.

Luck :wink:

 

[disassembled]

Are you using your effects loop? Are the output knobs on the front turned up? Try turning your loop OFF if it is on and see if that fixes your problem.

Greg

 

[hanson2713]

I believe that if you only have signal coming back to effects return A then only output A will work. If you run in stereo or switch the effects return to B then Output B will also work.