Triaxis midi problem

[progrockermusic]

Hi,
The midi control of my Tri-axis has just stopped working!
I run a FCB1010 to the midi in of the triaxis, midi thru from the triaxis to the midi thru of TC electronics G major.
Up until this afternoon selecting pedal 1 on the FCB1010 would select channel 1 on my triaxis and channel 1 on my G-major. I've checked all the midi cables by running them through the G-major and they work fine.
Has anyone else experienced this problem or knows what might be wrong??
Thanks

 

[scottkahn]

Just to clarify, that setup won't work.
MIDI Thru on the Triaxis has to go to the MIDI IN on the G-Major. Maybe that was a typo on your part.

If you connected from your foot controller to the G-Major's MIDI IN, then from the G-Major's MIDI Thru to the Triaxis MIDI IN, do you still have the problem?

Maybe you accidentally changed the Triaxis from receiving on MIDI Channel 1 or Omni to another channel. That would be the easy answer. If all of that fails, then you're going to have to call Mesa for help.